BJMXS - TIN-LEAD-ANTIMONY SOLDER:X-45 CORE, PRODUCT CODE:185

Product Identification

Product ID:TIN-LEAD-ANTIMONY SOLDER:X-45 CORE, PRODUCT CODE:185
MSDS Date:01/04/1993
FSC:3439
NIIN:00-269-9610
MSDS Number: BJMXS

Responsible Party
GARDINER SOLDER CO DIV OF GARDINER METAL CO
4820 S CAMPBELL AVE
CHICAGO, IL 60632-1416
US

Emergency Phone: 312-847-0100

Info Phone: 312-847-0100

Cage: 56244

Contractor
GARDINER SOLDER CO, DIV OF GARDINER METAL CO
CHICAGO, IL 60632-1416 US

Telephone: 312-847-0100/800-424-9300(CHEMTREC)

Cage: 56244

Ingredients

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 5-94.3%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 0.2-2.2%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 5-94.3%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192


ROSIN

CAS: 8050-09-7

Fraction By Weight: 0.5-3%

OSHA PEL 0.1MG/M3 FORMALDEHYD

ACGIH TLV: 0.1MG/M3 FORMALDEHYD

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:HEALTH STUDIES HAVE SHOWN THAT
POTENTIAL HEALTH RISKS MAY VARY BY INDIVIDUAL. ALWAYS MINIMIZE
EXPOSURE AS A PRECAUTION. SEE OSHA 29CFR1910.1025, SUBPART Z.
Explanation of Carcinogenicity:LEAD IS LISTED BY IARC AS A CARCINOGEN.
Effects of Overexposure:METALLIC TASTE IN THE MOUTH. IRRITATION OF THE
RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:RESPIRATORY/LUNG CONDITIONS.

First Aid

First Aid:SKIN-FLUSH WITH WATER IMMEDIATELY. TREAT FOR BURNS, SEEK
MEDICAL ATTENTION IF REQUIRED. EYES-FLUSH WITH WATER FOR 15
MINUTES, SEEK MEDICAL ATTENTION. INGEST-DRINK LARGE AMOUNTS OF
WATER. SEEK MEDICAL ATTENTION. NEVER GIVE LIQUIDS TO UNCONSCIOUS
PERSONS. INHALE-REMOVE TO FRESH AIR. SUPPORT RESPIRATION IF
REQUIRED. SEEK MEDICAL ATTENTION.

Fire Fighting

Flash Point:NON FLAMMABLE
Extinguishing Media:DRY CHEMICAL, DO NOT USE WATER.
Fire Fighting Procedures:USE CONTAINED BREATHING APPARATUS ABOVE 886C
(1627F).
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:COLLECT AND USE, IF CONTAMINATED OR IN SMALL
PARTICULES, VACCUM OR COLLECT MATERIAL. NEVER USE ANY METHOD WHICH
WILL GENERATE DUST.

Handling

Handling and Storage Precautions:NO INFORMATION GIVEN ON MSDS BY
SUPPLIER.
Other Precautions:AVOID CONTACT WITH FUMES AND DUST.

Exposure Controls

Respiratory Protection:DURING SOLDERING, TYPE: 0.03 MG/M3 - HALF-MASK;
2.5 MG/M3 - FULL FACE MASK; 50 MG/M3 - SELF-SUSTAINED RESPIRATORY
SUIT.
Ventilation:LOCAL EXHAUST-PREFERRED, MECHANICAL-OK, SPECIAL HEPA
FILTERS REQUIRED.
Protective Gloves:HEAT RESISTANT DURING SOLDERING.
Eye Protection:SAFETY GOGGLES OR FACE SHIELD.
Other Protective Equipment:AS REQUIRED TO AVOID CONTACT.
Work Hygienic Practices:WASH AFTER USE. FOLLOW GOOD INDUSTRIAL HYGIENIC
PORACTICE.
Supplemental Safety and Health
EXPOSURE TO LEAD IS REGULATED BY OSHA 1910.1025

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:2516F,1380C
Melt/Freeze Pt:M.P/F.P Text:361F,183C
Vapor Pres:1MM
Spec Gravity:SOLID
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER GREY SOLID, ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:TOXIC METAL FUMES ABOVE 800C (1627F).

Disposal

Waste Disposal Methods:NEVER DISPOSE OF IN TRASH. HOLD FOR RECYCLING OR
DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE & LOCAL LAWS AND
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.